Skip to content
Catalyst Note CN markCNCatalystNote

Noting the changes that set others in motion.

AI hardware

PsiQuantum demos low-loss optical switch for AI data center GPU networks

A quantum firm claims its silicon photonics switch loses only 1.2 dB of signal, reducing power needs in growing AI clusters.

PsiQuantum demos low-loss optical switch for AI data center GPU networks
Depth
1 outlet · newest source 405h ago

Key points

  • PsiQuantum’s prototype optical switch loses typically 1.2 dB of light in lab tests.
  • The device uses silicon photonics with no moving parts or amplifiers.
  • Competitors offer switches with more ports but often use amplification or mirrors.

PsiQuantum announced in a release earlier this week that it has developed an optical switch for AI data centers using its silicon photonics technology. according to the published report, the company demonstrated a prototype that typically loses only 1.2 dB of signal during lab tests. This level of loss represents about a quarter of the light, which is significantly lower than the 3 dB loss that typical data center optics can tolerate. The switch operates without an amplifier, distinguishing it from some existing solutions that require built-in amplification to maintain signal strength.

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

The claim

The optical circuit switch passes light directly from fiber to fiber without converting it to electrical signals. according to the published report, this approach avoids the power consumption and latency associated with regular data center switches that perform conversions at every hop. The device uses circuits etched on a silicon chip with no moving parts, unlike the microelectromechanical systems or tiny mirrors used by competitors like Google and Lumentum. PsiQuantum stated that this all-optical switch is designed to be used alongside regular packet switches in data center environments.

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

The response

Tom’s Hardware noted that the eight-port prototype is comparatively small against competitors’ devices that range from 32 to 300 ports. The outlet reported that Salience Labs and iPronics offer switches rated at under 2 dB, though they use built-in amplification. Google’s mirror-based Palomar switch also stays under 2 dB but features 136 ports. Lumentum’s switch supports 300 ports. While PsiQuantum’s loss figure is lower, the port count remains a significant gap compared to established alternatives in the market.

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

Why this matters now

Data movement between GPUs is becoming a bottleneck as AI clusters grow, according to the published report Optics provide higher bandwidth than copper, which has limitations in reach, but a shortage of lasers poses challenges for optical alternatives. Improving communication bandwidth and distance allows different racks of GPUs to communicate at speed and act as a single unit. The ability to maintain signal integrity with lower loss could help address these scaling issues without the power penalty of electrical conversions.

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

What buyers should weigh

Buyers must consider the trade-off between signal loss and port density. PsiQuantum’s switch offers lower loss (1.2 dB) but only eight ports, whereas competitors like Lumentum offer 300 ports with higher loss. The absence of moving parts and amplifiers in PsiQuantum’s design may reduce power consumption, but the smaller scale limits immediate deployment in large clusters. Market position depends on whether vendors can scale the technology to match competitor port counts while maintaining low loss. Vendor choice may hinge on specific cluster architecture needs and tolerance for integration complexity.

Evidence: reportedPsiQuantum turns its photonics know-how into an optical switch for supercharging AI data center GPU networks

aifleet-tomshardware

Why it matters

  • Lower signal loss reduces the need for amplification, potentially lowering power costs in data centers.
  • The eight-port limitation may restrict immediate adoption in large-scale AI clusters compared to 300-port alternatives.
  • Silicon photonics with no moving parts could offer greater reliability than mirror-based MEMS switches.
  • Addressing GPU communication bottlenecks is critical as AI cluster sizes continue to expand rapidly.

Topics: optical switching, silicon photonics, AI infrastructure, data centers, PsiQuantum

Updated

Ask the article

Local keyword search of this article; no generated answers.

Did this article give you the evidence you needed?

No vote saved on this device.
Your choice stays on this device. No public tally.

Questions readers ask

How does PsiQuantum's optical switch compare to competitors in terms of signal loss?

PsiQuantum's switch loses typically 1.2 dB of light, which is lower than the under 2 dB loss reported for competitors like Salience Labs and Google.

What is the main limitation of PsiQuantum's current prototype?

The prototype has only eight ports, which is significantly fewer than competitors' devices that offer 32 to 300 ports.

Does PsiQuantum's switch require amplification?

No, the switch operates without an amplifier, unlike some competitors that use built-in amplification to maintain signal strength.

Connected stories

This storyUS Election Results Signal Stricter Data Center Rules for AI InfrastructureUS Election Results Signal StricSouth Korea pledges $15.97B for AI infrastructure in 2027 budgetSouth Korea pledges $15.97B for Omen AI buys Aquatic Labs for $16M to build combined fluid sensorsOmen AI buys Aquatic Labs for $1DeepX claims AI chip runs 40C cooler than rivals in butter demoDeepX claims AI chip runs 40C co

Reading receipt

  • PsiQuantum’s prototype optical switch loses typically 1.2 dB of light in lab tests.
  • The device uses silicon photonics with no moving parts or amplifiers.
  • Competitors offer switches with more ports but often use amplification or mirrors.
Time spent: 0:00 · Depth: Full

Sources

  1. Tom's Hardware

Related stories

Background reading